Supported DYMO Printers and Labels
If you wish to use a DYMO brand printer, we recommend our customers use the DYMO 450 label printer with DuraReady 1032 or DuraReady 1035 stickers. Please Note: The DYMO 450 is discontinued, so it may be difficult to find. A quick browser search should surface some options. For example, at the time of writing this I see options at ULINE and eBay. You may find others!
DuraReady stickers do not work with the DYMO 550-series printer or with the new DYMO Connect software due to a limitation by DYMO that restricts users to DYMO-brand stickers.
The following printer and sticker combinations have been confirmed to work with the Oil Stickers feature.
| Sticker | DYMO 450-Series | DYMO 550-Series |
|
DYMO 30252 Address 3 1⁄2" × 1 1⁄8" |
✅ | ✅ |
|
DYMO 30324 Diskette 2 3⁄4" × 2 1⁄8" |
✅ | ✅ |
|
DYMO 30326 Video Top 3 1⁄10" × 1 4⁄5" |
✅ | ✅ |
|
DYMO 30334 2 1⁄4" × 1 1⁄4" |
✅ | ✅ |
|
DYMO 30336 2 1⁄8" × 1" |
✅ | ✅ |
|
DYMO 30370 Zip Disk 2 5⁄16" × 2" |
✅ | ✅ |
|
DuraReady 1020 3 1⁄2" × 1 1⁄8" |
✅ * | 🚫 |
|
DuraReady 1032 2 1⁄2" × 1 3⁄4" |
✅ * | 🚫 |
|
DuraReady 1035 2 5⁄16" × 2" |
✅ * | 🚫 |
|
DuraReady 1040 3" × 2” |
✅ * | 🚫 |
|
DuraReady 1042 2 1⁄4" × 1 1⁄4" |
✅ * | 🚫 |
|
DuraReady 1042 2 1⁄4" × 1 1⁄2" |
✅ * | 🚫 |
* Must be used with DYMO Label Software v8.7, see “Configure Your Printer” section below for details.
Configure Your Printer
Download and install the drivers for your printer and operating system.
For the DYMO 550-series download the latest DYMO Connect software for LabelWriter printers.
For the DYMO 450-series printer, you’ll need to instead download the DYMO Label Software v8.7 for Windows or Mac.
Connect your printer to your computer at this time.
Windows
Open your system Settings, go to Devices > Printers & Scanners, and verify your DYMO printer is installed. If not, try disconnecting and reconnecting the printer. If it still doesn't appear, select Add Device and add the DYMO printer.
If you're using a DYMO 550-series printer, click on your DYMO printer on the Printers & Scanners settings page. Click on Printing Preferences, then Advanced, and change the Paper Size to the label you've loaded into the printer. Click OK, then click Apply.
No additional configuration is necessary for DYMO 450-series printers.
Mac
Open your System Settings, go to Printers & Scanners, and verify your DYMO printer is installed. If not, try disconnecting and reconnecting the printer. If it still doesn't appear, select Add Printer and add the DYMO printer.
Troubleshooting
Consider the following when troubleshooting any issues with printing Oil Stickers on your DYMO printer:
- Verify the software installed is DYMO Label Software v8.7 if you are using the DuraReady brand for their stickers. There should only be one instance of this software on your computer. More than one instance of this software on your computer may cause issues.
- DYMO 450 Turbo: Has your driver been updated recently? To update, remove the existing driver from your computer and install the driver for Windows 7.
- There should only be one instance of the JSPrint Manager software on your computer. Ensure this is version 7 (version 8 is not compatible).
- The first time you attempt to print after installing JSPrintManager, you will be prompted to allow access from Shopmonkey. Select Don’t ask again for this site and select Allow.
- If you are using DYMO-brand stickers, you will need to download the latest DYMO Connect software for Label Writer printers.
- If you are using DuraReady stickers on a DYMO 450-series printer, you will need to download the DYMO Label Software v8.7 for Windows.
Known Limitations
DYMO-brand stickers come with non-printable margins. You may notice that some stickers have more non-printable space than others. We’ve done our best to maximize the available space, but Shopmonkey is limited by DYMO’s sticker formats.
Related Articles
Still have questions? Feel free to reach out to us through the chat icon. Thanks for reading!
Comments
0 comments
Article is closed for comments.